dhi.io/fleet-agent
Fleet Agent applies GitOps and HelmOps workloads on managed Kubernetes clusters.
All examples in this guide use the public image. If you've mirrored the repository for your own use (for example, to your Docker Hub namespace), update your commands to reference the mirrored image instead of the public one.
For example:
dhi.io/<repository>:<tag><your-namespace>/dhi-<repository>:<tag>For the examples, you must first use docker login dhi.io to authenticate to the registry to pull the images.
This image runs the fleetagent binary from rancher/fleet. Use it to replace rancher/fleet-agent in an existing
Fleet installation. The Fleet controller on the management cluster creates the agent deployment on each managed cluster,
so the usual way to use this image is to point the controller at it.
This image ships the Fleet 0.13, 0.14, 0.15 and 0.16 release lines. Use a minor tag such as 0.16, or a full
tag such as 0.16.3, to match the Fleet minor your controller runs; the 0 tag follows the newest minor. The
controller's default agent image carries the controller's own version. Upstream tags images with a leading v (for
example v0.16.3). The Debian tags publish both forms (0.16.3 and v0.16.3), so a v-prefixed agent tag in an
existing configuration or an air-gap image list resolves without a change; the Alpine tags carry no v, so replace any
v-prefixed agent tag there.
Inspect the agent version:
$ docker run --rm dhi.io/fleet-agent:<tag> --version
The agent needs a Kubernetes API connection and a registration with a Fleet controller, so it is not meant to be run standalone.
Set the agent image in the values of the upstream fleet chart. The controller then deploys the agent from this image
on every cluster it manages, including the local cluster. Replace <tag> with the matching image tag and <version>
with the Fleet chart version.
$ helm repo add fleet https://rancher.github.io/fleet-helm-charts/
$ helm --namespace cattle-fleet-system install --create-namespace --wait fleet-crd fleet/fleet-crd --version <version>
$ helm --namespace cattle-fleet-system install --wait fleet fleet/fleet --version <version> --values values.yaml
agentImage:
repository: dhi.io/fleet-agent
tag: <tag>
imagePullPolicy: IfNotPresent
Managed clusters pull the agent from the registry you configure. On the Fleet 0.16 chart, supply credentials for
dhi.io through global.cattle.imagePullSecrets in the chart values. Earlier charts have no pull secret value: mirror
the image to a registry your clusters can already pull from and set agentImage.repository to your mirror's repository
name. To turn on agent debug logging, set the chart's debug and debugLevel values: the controller then starts the
agent with --debug --debug-level <n>.
65532, whereas the upstream image runs as 1000. Deployments
created by the Fleet controller and the upstream charts set runAsUser: 1000 themselves, and the image starts as
either user.emptyDir volumes at /tmp and /.kube. Keep those mounts
when you enable readOnlyRootFilesystem./usr/local/bin/fleetagent, a link to /usr/bin/fleetagent. Upstream sets CMD ["fleetagent"]
with no entrypoint. The upstream charts and the controller set command: [fleetagent], which replaces the entrypoint,
so they work unchanged. With docker run, pass flags directly, for example --version.dev variants for debugging.v prefix; 0.16.3 replaces upstream's v0.16.3.Docker Hardened Images come in different variants depending on their intended use. Image variants are identified by their tag.
Runtime variants are designed to run your application in production. These images are intended to be used either directly or as the FROM image in the final stage of a multi-stage build. These images typically:
Build-time variants typically include dev in the tag name and are intended for use in the first stage of a
multi-stage Dockerfile. These images typically:
FIPS variants include fips in the variant name and tag. They come in both runtime and build-time variants. These
variants use cryptographic modules that have been validated under FIPS 140, a U.S. government standard for secure
cryptographic operations. For example, usage of MD5 fails in FIPS variants.
To view the image variants and get more information about them, select the Tags tab for this repository, and then select a tag.
To migrate your application to a Docker Hardened Image, you must update your Dockerfile. At minimum, you must update the base image in your existing Dockerfile to a Docker Hardened Image. This and a few other common changes are listed in the following table of migration notes.
| Item | Migration note |
|---|---|
| Base image | Replace your base images in your Dockerfile with a Docker Hardened Image. |
| Package management | Non-dev images, intended for runtime, don't contain package managers. Use package managers only in images with a dev tag. |
| Non-root user | By default, non-dev images, intended for runtime, run as the nonroot user. Ensure that necessary files and directories are accessible to the nonroot user. |
| Multi-stage build | Utilize images with a dev tag for build stages and non-dev images for runtime. For binary executables, use a static image for runtime. |
| TLS certificates | Docker Hardened Images contain standard TLS certificates by default. There is no need to install TLS certificates. |
| Ports | Non-dev hardened images run as a nonroot user by default. As a result, applications in these images can't bind to privileged ports (below 1024) when running in Kubernetes or in Docker Engine versions older than 20.10. To avoid issues, configure your application to listen on port 1025 or higher inside the container. |
| Entry point | Docker Hardened Images may have different entry points than images such as Docker Official Images. Inspect entry points for Docker Hardened Images and update your Dockerfile if necessary. |
| No shell | By default, non-dev images, intended for runtime, don't contain a shell. Use dev images in build stages to run shell commands and then copy artifacts to the runtime stage. |
The following steps outline the general migration process.
Find hardened images for your app.
A hardened image may have several variants. Inspect the image tags and find the image variant that meets your needs.
Update the base image in your Dockerfile.
Update the base image in your application's Dockerfile to the hardened image you found in the previous step. For
framework images, this is typically going to be an image tagged as dev because it has the tools needed to install
packages and dependencies.
For multi-stage Dockerfiles, update the runtime image in your Dockerfile.
To ensure that your final image is as minimal as possible, you should use a multi-stage build. All stages in your
Dockerfile should use a hardened image. While intermediary stages will typically use images tagged as dev, your
final runtime stage should use a non-dev image variant.
Install additional packages
Docker Hardened Images contain minimal packages in order to reduce the potential attack surface. You may need to install additional packages in your Dockerfile. Inspect the image variants to identify which packages are already installed.
Only images tagged as dev typically have package managers. You should use a multi-stage Dockerfile to install the
packages. Install the packages in the build stage that uses a dev image. Then, if needed, copy any necessary
artifacts to the runtime stage that uses a non-dev image.
For Alpine-based images, you can use apk to install packages. For Debian-based images, you can use apt-get to
install packages.
The following are common issues that you may encounter during migration.
The hardened images intended for runtime don't contain a shell nor any tools for debugging. The recommended method for debugging applications built with Docker Hardened Images is to use Docker Debug to attach to these containers. Docker Debug provides a shell, common debugging tools, and lets you install other tools in an ephemeral, writable layer that only exists during the debugging session.
By default image variants intended for runtime, run as the nonroot user. Ensure that necessary files and directories are accessible to the nonroot user. You may need to copy files to different directories or change permissions so your application running as the nonroot user can access them.
Non-dev hardened images run as a nonroot user by default. As a result, applications in these images can't bind to
privileged ports (below 1024) when running in Kubernetes or in Docker Engine versions older than 20.10. To avoid issues,
configure your application to listen on port 1025 or higher inside the container, even if you map it to a lower port on
the host. For example, docker run -p 80:8080 my-image will work because the port inside the container is 8080, and
docker run -p 80:81 my-image won't work because the port inside the container is 81.
By default, image variants intended for runtime don't contain a shell. Use dev images in build stages to run shell
commands and then copy any necessary artifacts into the runtime stage. In addition, use Docker Debug to debug containers
with no shell.
Docker Hardened Images may have different entry points than images such as Docker Official Images. Use docker inspect
to inspect entry points for Docker Hardened Images and update your Dockerfile if necessary.