dhi.io/linkerd-web
The Linkerd viz web dashboard, which serves the service mesh UI and its admin API.
All examples in this guide use the public image. If you've mirrored the repository for your own use (for example, to your Docker Hub namespace), update your commands to reference the mirrored image instead of the public one.
For example:
dhi.io/linkerd-web:<tag><your-namespace>/dhi-linkerd-web:<tag>For the examples, you must first use docker login dhi.io to authenticate to the registry to pull the images.
Linkerd web is the viz dashboard. This image contains the dashboard binary and static assets. The entrypoint is ./web,
the working directory is /linkerd, and the process runs as UID 65532. Dashboard HTTP is served on port 8084. The admin
server on port 9994 serves /ping, /ready, and /metrics.
The UI is described in the Linkerd overview. The dashboard is the web directory of
linkerd2.
./web -version prints the Linkerd release stored in LINKERD_CONTAINER_VERSION_OVERRIDE. On this image that variable
is edge-<release>, the edge release the tag was built from:
$ docker run --rm dhi.io/linkerd-web:<tag> -version
edge-<release>
The HTML attribute data-release-version and GET /api/version read the linkerdVersion field of the linkerd-config
ConfigMap. A start that cannot read that ConfigMap leaves both empty.
Install the Linkerd control plane as described in the
Linkerd installation guide, then install the viz extension and point the
dashboard image at this image. The chart builds the reference from dashboard.image.registry, dashboard.image.name
(default web), and dashboard.image.tag (default linkerdVersion):
$ helm repo add linkerd https://helm.linkerd.io/edge
$ helm install linkerd-viz linkerd/linkerd-viz \
--create-namespace --namespace linkerd-viz \
--set dashboard.image.registry=dhi.io \
--set dashboard.image.name=linkerd-web \
--set dashboard.image.tag=<tag> \
--set dashboard.UID=65532 \
--set dashboard.GID=65532
Without dashboard.image.tag the chart uses its own Linkerd release version, for example edge-<release>, which is
also a tag of this image. Set dashboard.image.name to linkerd-web; the chart default is web. Add
--set imagePullSecrets[0].name=<secret> when the cluster pulls from dhi.io with a pull secret.
dashboard.UID and dashboard.GID are empty in the chart, and the web template falls back to defaultUID and
defaultGID, both 2103. Set them to 65532 so the dashboard container runs as the image user and group. The chart also
sets readOnlyRootFilesystem. In a manifest you write yourself, set runAsUser and runAsGroup to 65532.
A full dashboard needs a cluster: the metrics API, and the linkerd-config ConfigMap. The process also needs a
Kubernetes client configuration. With none, it exits because no configuration has been provided.
A kubeconfig whose API server is https://127.0.0.1:1 is enough for the process to stay up and serve the UI files. That
address refuses connections. Create the file mode 0644 so UID 65532 can read it. This only proves that the UI process
serves. data-release-version stays empty. The log includes running version edge-<release> and
Failed to fetch linkerd-config, and it warns that no cluster domain was passed and falls back to cluster.local.
$ mkdir -p /tmp/linkerd-web
$ cat > /tmp/linkerd-web/kubeconfig <<'EOF'
apiVersion: v1
kind: Config
clusters:
- name: local
cluster:
server: https://127.0.0.1:1
contexts:
- name: local
context:
cluster: local
user: local
current-context: local
users:
- name: local
user: {}
EOF
$ chmod 0644 /tmp/linkerd-web/kubeconfig
$ docker run -d --name linkerd-web \
-p 8084:8084 -p 9994:9994 \
-v /tmp/linkerd-web/kubeconfig:/kubeconfig:ro \
dhi.io/linkerd-web:<tag> \
--kubeconfig /kubeconfig
$ timeout 30 sh -c 'until curl -fsS http://127.0.0.1:9994/ping >/dev/null 2>&1; do sleep 1; done'
$ curl -fsS http://127.0.0.1:9994/ping
pong
$ curl -fsS http://127.0.0.1:8084/ | grep -o '/dist/index_bundle.js'
/dist/index_bundle.js
$ curl -fsS http://127.0.0.1:8084/api/version
{"version":""}
GET / returns HTML (Content-Type: text/html). The body contains <div class="main" id="main" and references
/dist/index_bundle.js. GET /api/version returns {"version":""}.
edge-<release>, and the release number, for example
<release> without the edge- prefix. The upstream image is tagged with the Linkerd release only. The 26 tag moves
to each new edge release of 2026 and the 26.<minor> tag to each edge release of that minor line. Upstream edge
releases can include breaking changes, so pin edge-<release> or <release> to stay on one release.dashboard.UID and dashboard.GID to 65532. Left empty, the chart falls back to 2103.LINKERD_CONTAINER_VERSION_OVERRIDE is set to the Linkerd release, and -version prints it. The UI release fields
come from the linkerd-config ConfigMap.Docker Hardened Images come in different variants depending on their intended use. Image variants are identified by their tag.
Runtime variants are designed to run your application in production. These images are intended to be used either directly or as the FROM image in the final stage of a multi-stage build. These images typically:
Build-time variants typically include dev in the tag name and are intended for use in the first stage of a
multi-stage Dockerfile. These images typically:
FIPS variants include fips in the variant name and tag. They come in both runtime and build-time variants. These
variants use cryptographic modules that have been validated under FIPS 140, a U.S. government standard for secure
cryptographic operations. For example, usage of MD5 fails in FIPS variants.
To view the image variants and get more information about them, select the Tags tab for this repository, and then select a tag.
To migrate your application to a Docker Hardened Image, you must update your Dockerfile. At minimum, you must update the base image in your existing Dockerfile to a Docker Hardened Image. This and a few other common changes are listed in the following table of migration notes.
| Item | Migration note |
|---|---|
| Base image | Replace your base images in your Dockerfile with a Docker Hardened Image. |
| Package management | Non-dev images, intended for runtime, don't contain package managers. Use package managers only in images with a dev tag. |
| Non-root user | By default, non-dev images, intended for runtime, run as the nonroot user. Ensure that necessary files and directories are accessible to the nonroot user. |
| Multi-stage build | Utilize images with a dev tag for build stages and non-dev images for runtime. For binary executables, use a static image for runtime. |
| TLS certificates | Docker Hardened Images contain standard TLS certificates by default. There is no need to install TLS certificates. |
| Ports | Non-dev hardened images run as a nonroot user by default. As a result, applications in these images can't bind to privileged ports (below 1024) when running in Kubernetes or in Docker Engine versions older than 20.10. To avoid issues, configure your application to listen on port 1025 or higher inside the container. |
| Entry point | Docker Hardened Images may have different entry points than images such as Docker Official Images. Inspect entry points for Docker Hardened Images and update your Dockerfile if necessary. |
| No shell | By default, non-dev images, intended for runtime, don't contain a shell. Use dev images in build stages to run shell commands and then copy artifacts to the runtime stage. |
The following steps outline the general migration process.
Find hardened images for your app.
A hardened image may have several variants. Inspect the image tags and find the image variant that meets your needs.
Update the base image in your Dockerfile.
Update the base image in your application's Dockerfile to the hardened image you found in the previous step. For
framework images, this is typically going to be an image tagged as dev because it has the tools needed to install
packages and dependencies.
For multi-stage Dockerfiles, update the runtime image in your Dockerfile.
To ensure that your final image is as minimal as possible, you should use a multi-stage build. All stages in your
Dockerfile should use a hardened image. While intermediary stages will typically use images tagged as dev, your
final runtime stage should use a non-dev image variant.
Install additional packages
Docker Hardened Images contain minimal packages in order to reduce the potential attack surface. You may need to install additional packages in your Dockerfile. Inspect the image variants to identify which packages are already installed.
Only images tagged as dev typically have package managers. You should use a multi-stage Dockerfile to install the
packages. Install the packages in the build stage that uses a dev image. Then, if needed, copy any necessary
artifacts to the runtime stage that uses a non-dev image.
For Alpine-based images, you can use apk to install packages. For Debian-based images, you can use apt-get to
install packages.
The following are common issues that you may encounter during migration.
The hardened images intended for runtime don't contain a shell nor any tools for debugging. The recommended method for debugging applications built with Docker Hardened Images is to use Docker Debug to attach to these containers. Docker Debug provides a shell, common debugging tools, and lets you install other tools in an ephemeral, writable layer that only exists during the debugging session.
By default image variants intended for runtime, run as the nonroot user. Ensure that necessary files and directories are accessible to the nonroot user. You may need to copy files to different directories or change permissions so your application running as the nonroot user can access them.
Non-dev hardened images run as a nonroot user by default. As a result, applications in these images can't bind to
privileged ports (below 1024) when running in Kubernetes or in Docker Engine versions older than 20.10. To avoid issues,
configure your application to listen on port 1025 or higher inside the container, even if you map it to a lower port on
the host. For example, docker run -p 80:8080 my-image will work because the port inside the container is 8080, and
docker run -p 80:81 my-image won't work because the port inside the container is 81.
By default, image variants intended for runtime don't contain a shell. Use dev images in build stages to run shell
commands and then copy any necessary artifacts into the runtime stage. In addition, use Docker Debug to debug containers
with no shell.
Docker Hardened Images may have different entry points than images such as Docker Official Images. Use docker inspect
to inspect entry points for Docker Hardened Images and update your Dockerfile if necessary.